Distance between cities › Australia › New South Wales › Tuppal, NSW › Distance from Tuppal to Yanco

Distance from Tuppal, NSW to Yanco, NSW

Distance

209 km

Time

2 hours 21 mins

Gas Cost

$15 - $40

There are 159.45 km (99.08 miles) from Tuppal to Yanco in northeast direction and 209.21 km (130 miles) by car, following the A39 route.

Tuppal and Yanco are 2 hours 21 mins far apart, if you drive non-stop .

This is the fastest route from Tuppal, NSW to Yanco, NSW.

Tuppal, NSW and Yanco, NSW are in the same time zone (AEST). Current time in both locations is 12:24 am.

Any questions or tips to share?

Share with fellow travellers any question or tips about the route from Tuppal, NSW to Yanco, NSW:

Gas Consumption and Emissions

A car with a fuel efficiency of 10.8 l/100 km will need 22.59 liters of fuel to cover the route between Tuppal, NSW and Yanco, NSW.

The estimated cost of fuel to go from Tuppal to Yanco is $33.

During the route, an average car will release 540.29 kilograms of CO₂ to the atmosphere. The carbon footprint would be 2.58 kilograms of CO₂ per kilometer.

Average Australia gas price used for calculation is $1.46 per liter of regular gas. Price last updated on April 28, 2017.
Read more about our CO₂ calculation.

Best Hotels In or Near Yanco, NSW

Do you have where to stay when you arrive to Yanco, NSW? Check out our hotel recommendations:

Halfway Point Between Tuppal, NSW and Yanco, NSW

If you want to meet halfway between Tuppal, NSW and Yanco, NSW or just make a stop in the middle of your trip, the exact coordinates of the halfway point of this route are -35.168968 and 145.906631, or 35º 10' 8.2848" S, 145º 54' 23.8716" E. This location is 64.98 miles away from Tuppal, NSW and Yanco, NSW and it would take approximately 1 hour 10 mins to reach the halfway point from both locations.